Configuring FCOS to use WireGuard

Some examples in this page may not work properly. An issue with WireGuard SELinux isolation breaks Pre/Post actions in the WireGuard configuration for recent releases of Fedora Coreos. You can check the progress of this issue on the issue tracker.

Introduction

WireGuard is a novel VPN that runs inside the Linux Kernel and uses state-of-the-art cryptography. It aims to be faster, simpler, leaner, and more useful than IPSec, while avoiding the massive headache. It intends to be considerably more performant than OpenVPN. WireGuard is designed as a general purpose VPN for running on embedded interfaces and super computers alike, fit for many different circumstances. It runs over UDP.

FCOS has full support for WireGuard out of the box. This guide is going to demonstrate how to set up a single connection between a FCOS server and one client computer. It goes over the basic client configuration, but it does not cover installing WireGuard on your clients.

Generate Keys

You will need to generate some keys to configure WireGuard. For this guide, the keys should be pre-generated on your workstation. First, let’s create the FCOS WireGuard keys:

Generate FCOS WireGuard keys

$ umask 077
$ wg genkey | tee privatekey | wg pubkey > publickey

These keys will be referenced as fcos_public_key and fcos_private_key from here on out in this guide.

Now let’s generate the client keys:

Generate Client One WireGuard keys

$ umask 077
$ wg genkey | tee privatekey | wg pubkey > publickey

These keys will be referenced as client_one_public_key and client_one_private_key from here on out in this guide.

Now create a PresharedKey:

Generate a Preshared key per peer pair

$ wg genpsk > fcos_client_one_psk

The PresharedKey will be referenced as fcos_client_one_psk from here on out in this guide.

The wg genpsk command generates a PresharedKey that can only be used once per peer pair. Every peer you add to the FCOS server will need to generate a unique PresharedKey.

Configure WireGuard on FCOS

You can now configure your Ignition config to create the wg0 configuration file:

Example FCOS WireGuard configuration

variant: fcos
version: 1.5.0
storage:
  files:
    - path: /etc/wireguard/wg0.conf
      mode: 0600
      contents:
        inline: |
          [Interface]
          Address = 192.168.71.1/24,fdc9:3c6b:21c7:e6bd::1/64
          PrivateKey = 
          ListenPort = 51820

          [Peer]
          PublicKey = 
          PresharedKey = 
          AllowedIPs = 192.168.71.0/24,fdc9:3c6b:21c7:e6bd::/64
systemd:
  units:
    - name: [email protected]
      enabled: true

Boot FCOS and log in. When you run sudo wg show you should see this:

Check WireGuard configuration on FCOS

[core@wireguard-demo ~]$ sudo wg show
interface: wg0
  public key: <fcos_public_key>
  private key: (hidden)
  listening port: 51820

peer: <client_one_public_key>
  preshared key: (hidden)
  endpoint: <Client IP Address>:51821
  allowed ips: 192.168.71.0/24, fdc9:3c6b:21c7:e6bd::/64

[root@wireguard-demo ~]# ip a s wg0
12: wg0: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1420 qdisc noqueue state UNKNOWN group default qlen 1000
    link/none
    inet 192.168.71.1/24 scope global wg0
       valid_lft forever preferred_lft forever
    inet6 fdc9:3c6b:21c7:e6bd::1/64 scope global
       valid_lft forever preferred_lft forever

<Client IP address> above is the IP or FQDN of the Client computer.

Configure WireGuard on a client

You will now want to configure WireGuard on your client computer with the following configuration:

Client WireGuard configuration

[Interface]
Address = 192.168.71.2/24,fdc9:3c6b:21c7:e6bd::2/64
PrivateKey = <client_one_private_key>
ListenPort = 51821

[Peer]
PublicKey = <fcos_public_key>
PresharedKey = <fcos_client_one_psk>
Endpoint = <FCOS IP address>:51820
AllowedIPs = 192.168.71.0/24,fdc9:3c6b:21c7:e6bd::/64

<FCOS IP address> is the IP or FQDN of the FCOS server.

Write the above config to /etc/wireguard/wg0.conf and chmod 0600 /etc/wireguard/wg0.conf on your client. Run sudo systemctl start [email protected] and then check your configuration:

Check WireGuard configuration on a client

[root@wireguard-client ~]# wg show
interface: wg0
  public key: <client_one_public_key>
  private key: (hidden)
  listening port: 51821

peer: <fcos_public_key>
  preshared key: (hidden)
  endpoint: <FCOS IP address>:51820
  allowed ips: 192.168.71.0/24, fdc9:3c6b:21c7:e6bd::/64
[root@wireguard-client ~]# ip a s wg0
21: wg0: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1420 qdisc noqueue state UNKNOWN group default qlen 1000
    link/none
    inet 192.168.71.2/24 scope global wg0
       valid_lft forever preferred_lft forever
    inet6 fdc9:3c6b:21c7:e6bd::2/64 scope global
       valid_lft forever preferred_lft forever

Test the WireGuard connection

You can now ping the FCOS server’s WireGuard IP address:

Ping the FCOS server over WireGuard from client

[root@wireguard-client ~]# ping 192.168.71.1
PING 192.168.71.1 (192.168.71.1) 56(84) bytes of data.
64 bytes from 192.168.71.1: icmp_seq=1 ttl=64 time=0.439 ms
64 bytes from 192.168.71.1: icmp_seq=2 ttl=64 time=0.422 ms
64 bytes from 192.168.71.1: icmp_seq=3 ttl=64 time=0.383 ms
^C
--- 192.168.71.1 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2027ms
rtt min/avg/max/mdev = 0.383/0.414/0.439/0.023 ms

[root@wireguard-client ~]# ping6 fdc9:3c6b:21c7:e6bd::1
PING fdc9:3c6b:21c7:e6bd::1(fdc9:3c6b:21c7:e6bd::1) 56 data bytes
64 bytes from fdc9:3c6b:21c7:e6bd::1: icmp_seq=1 ttl=64 time=1.55 ms
64 bytes from fdc9:3c6b:21c7:e6bd::1: icmp_seq=2 ttl=64 time=0.454 ms
64 bytes from fdc9:3c6b:21c7:e6bd::1: icmp_seq=3 ttl=64 time=0.424 ms
64 bytes from fdc9:3c6b:21c7:e6bd::1: icmp_seq=4 ttl=64 time=0.424 ms
^C
--- fdc9:3c6b:21c7:e6bd::1 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3054ms
rtt min/avg/max/mdev = 0.424/0.712/1.546/0.481 ms

When you run sudo wg show on your client you should see a recent handshake and a transfer sections with sent and received:

Verify handshake and transfer metrics

[root@wireguard-client ~]# wg show
interface: wg0
  public key: <client_one_public_key>
  private key: (hidden)
  listening port: 51821

peer: <fcos_public_key>
  preshared key: (hidden)
  endpoint: <Client IP address>:51820
  allowed ips: 192.168.71.0/24, fdc9:3c6b:21c7:e6bd::/64
  latest handshake: 9 seconds ago
  transfer: 22.02 KiB received, 22.28 KiB sent

Route all traffic over WireGuard

If you plan on forwarding all of your client’s traffic through the FCOS instance you will need to enable IP Forwarding and you need to set and set some PostUp and PostDown directives:

Example FCOS WireGuard configuration with IP forwarding

variant: fcos
version: 1.5.0
storage:
  files:
    - path: /etc/sysctl.d/90-ipv4-ip-forward.conf
      mode: 0644
      contents:
        inline: |
          net.ipv4.ip_forward = 1

    - path: /etc/sysctl.d/90-ipv6-ip-forwarding.conf
      mode: 0644
      contents:
        inline: |
          net.ipv6.conf.all.forwarding = 1

    - path: /etc/wireguard/wg0.conf
      mode: 0600
      contents:
        inline: |
          [Interface]
          Address = 192.168.71.1/24,fdc9:3c6b:21c7:e6bd::1/64
          PrivateKey = 
          ListenPort = 51820

          PostUp = iptables -A FORWARD -i wg0 -j ACCEPT; iptables -t nat -A POSTROUTING -o enp1s0 -j MASQUERADE; ip6tables -A FORWARD -i wg0 -j ACCEPT; ip6tables -t nat -A POSTROUTING -o enp1s0 -j MASQUERADE
          PostDown = iptables -D FORWARD -i wg0 -j ACCEPT; iptables -t nat -D POSTROUTING -o enp1s0 -j MASQUERADE; ip6tables -D FORWARD -i wg0 -j ACCEPT; ip6tables -t nat -D POSTROUTING -o enp1s0 -j MASQUERADE

          [Peer]
          PublicKey = 
          PresharedKey = 
          AllowedIPs = 192.168.71.0/24,fdc9:3c6b:21c7:e6bd::/64
systemd:
  units:
    - name: [email protected]
      enabled: true

FCOS uses predictable interface names by default. Please take care to use the correct interface name for your hardware in the above PostUp and PostDown commands!

and set AllowedIPs = 0.0.0.0/0,::/0 in /etc/wireguard/wg0.conf on the client configuration to route all IPv4 and IPv6 the traffic on the client computer over the WireGuard interface:

A configuration for routing all traffic on the client over WireGuard:

[Interface]
Address = 192.168.71.1/24,fdc9:3c6b:21c7:e6bd::2/64
PrivateKey = <client_one_private_key>
ListenPort = 51821

[Peer]
PublicKey = <fcos_public_key>
PresharedKey = <fcos_client_one_psk>
Endpoint = <FCOS IP Address>:51820
AllowedIPs = 0.0.0.0/0,::/0

Want to help? Learn how to contribute to Fedora Docs ›