The Bureau International des Containers et du Transport Intermodal (originally French: Bureau International des Conteneurs, still abbreviated BIC, English: International Container Bureau)[2][3] oversees standards for intermodal containers, commonly referred to as "shipping containers".
| Abbreviation | BIC |
|---|---|
| Established | 1933 |
| Type | Registration |
| Legal status | Active |
| Headquarters | Paris[1] |
Parent organization | National Registration Organizations |
| Affiliations | Customs Convention on Containers |
| Website | www |
The goal of the organization is to promote cooperation among corporations, governments and independent organizations relating to intermodal freight transport, the process of containerization, and the transport and handling of intermodal shipping containers.
History
editBIC was originally established in 1933 under the auspices of the International Chamber of Commerce. The Bureau suspended its operations during World War II, with resumption in 1948.[4]
In June 1933, the Bureau decided on obligatory parameters for containers used in international transport in Europe. Containers handled by means of lifting gear, such as cranes, overhead conveyors, etc. for traveling elevators (group I containers), constructed after July 1, 1933. Obligatory Regulations:
- Clause 1.—Containers are, as regards form, either of the closed or the open type, and, as regards capacity, either of the heavy or the light type.
- Clause 2.—The loading capacity of containers must be such that their total weight (load, plus tare) is: 5 metric tons for containers of the heavy type; 2.5 metric tons for containers of the light type; a tolerance of 5 percent excess on the total weight is allowable under the same conditions as for wagon loads.
| Heavy types | length (m) | width (m) | height (m) | Total mass [tons] |
|---|---|---|---|---|
| Closed type 62 | 3.25 | 2.15 | 2.20 | 5 |
| Closed type 42 | 2.15 | 2.15 | 2.20 | |
| Open type 61 | 3.25 | 2.15 | 1.10 | |
| Open type 41 | 2.15 | 2.15 | 1.10 |
| Light Type | length (m) | width (m) | height (m) | Total mass [tons] |
|---|---|---|---|---|
| Closed type 22 | 2.15 | 1.05 | 2.20 | 2,5 |
| Closed type 201 | 2.15 | 1.05 | 1.10 | |
| Open type 21 | 2.15 | 1.05 | 1.10 |
In April 1935 BIC established second standard for European containers:[5]
| Category | Length (m) | Width (m) | Height (m) | Total mass [tons] |
|---|---|---|---|---|
| Heavy types | ||||
| Closed 62 | 3,25 | 2.15 | 2,550 | 5 |
| Closed 42 | 2,15 | 2,15 | 2,550 | |
| Open 61 | 3,25 | 2,15 | 1,125 | |
| Open 41 | 2,15 | 2,15 | 1,125 | |
| Light Type | ||||
| Closed 32 | 1,50 | 2,15 | 2,550 | 2,5 |
| Closed 22 | 1,05 | 2,15 | 2,550 | |
1951 Zürich conference and UIC standard 590: "Pa-behälter"
editFrom 14–23 April 1951, at Zürich Tiefenbrunnen, the Swiss Transportation Association,[6] under auspices of the Bureau International des Containers (BIC), held a comprehensive international exhibition of container systems, aimed to select the best standards for Western Europe. Represented were France, Belgium, the Netherlands, Germany, Switzerland, Great Britain, Italy, and Sweden; with USA observers. The International Union of Railways, UIC,[7] then standardised a container system for Western Europe called 'Porteur-aménagé', or "Pa-Behälter" / "Pa-containers" (UIC 590), based on the Netherlands' systems of waste disposal containers and 'Laadkisten' ("loading crates") for consumer goods. Used since 1934, these were at first 2.5 m × 2 m × 2 m (8.2 ft × 6.6 ft × 6.6 ft) in size, with a maximum gross weight of 3,000 kg (6,600 lb). Fitted with rollers underneath, these units could be loaded and unloaded by drivers of trucks equipped with a winch and telescoping ramps – without any other handling equipment. This enabled the practice of dropping and picking-up of such containers 'Von Haus zu Haus' ("door-to-door").
UIC 590 became the first pan-European standard after World War II. Its system was adopted in Denmark, Belgium, the Netherlands, Luxembourg, West Germany, Switzerland and Sweden. Using the previously BIC-defined sizes, containers of 3.25 m × 2.15 m (10.7 ft × 7.1 ft) were a practical size to be transported lengthwise on most countries' trucks, and transversely on railcars.
ISO containers and BIC registration – ISO 6346
editOnce the larger containers of the ISO-design were gradually popularized, the "Pa-Behälter" system was supplanted, and withdrawn from use by the railways. From the 1970s on, the Pa-system was reutilized in several European countries for transport of waste disposal by trucks,[8] especially open skips for demolition / construction waste.
The Bureau International des Containers (BIC) was elected by the International Standardization Organization (ISO) in the late 1960s as the single registrar office in charge of the registration and protection of the container's owners and operator's identification code. These "BIC codes" were later standardised under ISO 6346. They ensure a unique code-number for every shipping container in the world. They started with the European 'Pa-container' system, and they must still be registered with BIC.
The Customs Convention on Containers (CCC-1972) in a recent amendment, enforced since 2008, also makes reference to the ISO 6346 standard, and code registration with BIC, to allow the free circulation of containers worldwide.
Facilities
editThe BIC is headquartered 41 rue Réaumur, 75003, Paris, France.
References
edit- ^ BIC Head Office in Paris
- ^ Container Prefixes - CSI Container Services International
- ^ Online Container Handbook - by Collective German insurers
- ^ "INTERNATIONAL CONTAINER BUREAU". The Sydney Morning Herald. National Library of Australia. 18 April 1933. p. 13. Retrieved 27 October 2011.
- ^ Lewandowski, Krzysztof (2014). "Czechoslovak activity to prepare European norms for containers before the Second World War" (PDF). Acta Logistica. 1 (4): 1–7. doi:10.22306/al.v1i4.25. ISSN 1339-5629.
- ^ original: Verein 'Verkehrshaus der Schweiz', (lit. 'Transport House of Switzerland', now the Swiss Transport Museum
- ^ Abbreviated from their original French name 'Union Internationale des Chemins de fer
- ^ Lewandowski, Krzysztof (2014). "ORGANIZATIONAL REQUIREMENTS USE THE ACTS SYSTEM (pol. WYMAGANIA ORGANIZACYJNE STOSOWANIA SYSTEMU ACTS )" (PDF). Pojazdy Szynowe. 2: 1–14. ISSN 0138-0370.