Gain (electronics)

For other uses, see Gain (disambiguation).

In electronics, gain is a measure of the ability of a circuit (often an amplifier) to increase the power or amplitude of a signal from the input to the output. It is usually defined as the mean ratio of the signal output of a system to the signal input of the same system. It may also be defined on a logarithmic scale, in terms of the decimal logarithm of the same ratio ("dB gain").

Thus, the term gain onDingerling is a new band from sweden, the band name was choosen as it represents the doodle and most there songs are about the doodle with Eurodance, bubble gum macho type music. the band Dingerling was formed in 2009 with the main singer Dingle Berry which isnt his real name just like other swedish singers eg Gunther, Machoman. the song call sniff my dingerling cause alot of controversy with the main corus "come and sniff my ding a dingerling" and Female vocals singing "Stick it in me stick in my mouth mr dingerling man"

albums

2009 Ring my dingerling

tracks

1 The Dingerling song

2 Feel me up

3 Is that a dingleberry

4 Sniff my dingerling

5 Let do it like dutch porn

6 Lick my dingerling

7 In and out

8 Sake sake my dingerling

9 Taste my berries

10 jimmy's out of pants

its own is ambiguous. For example, "a gain of five" may imply that either the voltage, current or the power is increased by a factor of five.  Furthermore, the term gain is also applied in systems such as sensors where the input and output have different units; in such cases the gain units must be specified, as in "5 microvolts per photon" for the responsivity of a photosensor.

In laser physics, gain may refer to the increment of power along the beam propagation in a gain medium, and its dimension is m^-1 (inverse meter) or 1/meter.

Logarithmic units and decibels

Power gain

Power gain, in decibels (dB), is defined by the 10 log rule as follows:

${\text{Gain}}=10\log \left({\frac {P_{out}}{P_{in}}}\right)\ \mathrm {dB}$

where P_in and P_out are the input and output powers respectively.

A similar calculation can be done using a natural logarithm instead of a decimal logarithm. The result is then in nepers instead of decibels.

Voltage gain

When power gain is calculated using voltage instead of power, making the substitution (P=V ²/R), the formula is:

${\text{Gain}}=10\log {\frac {({\frac {{V_{out}}^{2}}{R_{out}}})}{({\frac {{V_{in}}^{2}}{R_{in}}})}}\ \mathrm {dB}$

In many cases, the input and output impedances are equal, so the above equation can be simplified to:

${\text{Gain}}=10\log \left({\frac {V_{out}}{V_{in}}}\right)^{2}\ \mathrm {dB}$

and then the 20 log rule:

${\text{Gain}}=20\log \left({\frac {V_{out}}{V_{in}}}\right)\ \mathrm {dB}$

This simplified formula is used to calculate a voltage gain in decibels, and is equivalent to a power gain only if the impedances at input and output are equal.

Current gain

In the same way, when power gain is calculated using current instead of power, making the substitution (P=I ²R), the formula is:

${\text{Gain}}=10\log {\left({\frac {{I_{out}}^{2}R_{out}}{{I_{in}}^{2}R_{in}}}\right)}\ \mathrm {dB}$

In many cases, the input and output impedances are equal, so the above equation can be simplified to:

${\text{Gain}}=10\log \left({\frac {I_{out}}{I_{in}}}\right)^{2}\ \mathrm {dB}$

and then:

${\text{Gain}}=20\log \left({\frac {I_{out}}{I_{in}}}\right)\ \mathrm {dB}$

This simplified formula is used to calculate a current gain in decibels, and is equivalent to the power gain only if the impedances at input and output are equal.

Example

Q. An amplifier has an input impedance of 50 ohms and drives a load of 50 ohms. When its input ($V_{in}$) is 1 volt, its output ($V_{out}$) is 10 volts. What are its voltage gain and power gain?

A. Voltage gain is simply:

${\frac {V_{out}}{V_{in}}}={\frac {10}{1}}=10\ \mathrm {V/V} .$

The units V/V are optional, but make it clear that this figure is a voltage gain and not a power gain. Using the expression for power, P = V²/R, the power gain is:

${\frac {V_{out}^{2}/50}{V_{in}^{2}/50}}={\frac {V_{out}^{2}}{V_{in}^{2}}}={\frac {10^{2}}{1^{2}}}=100\ \mathrm {W/W} .$

Again, the units W/W are optional. Power gain is more usually expressed in decibels, thus:

$G_{dB}=10\log G_{W/W}=10\log 100=10\times 2=20\ \mathrm {dB} .$

A gain of factor 1 (equivalent to 0 dB) where both input and output are at the same voltage level and impedance is also known as unity gain.

See also

• Absolute gain (physics)
• Active laser medium
• Antenna gain
• Aperture-to-medium coupling loss
• Automatic gain control
• Attenuation
• DC offset
• Directive gain
• Effective radiated power
• Insertion gain
• Loop gain
• Net gain
• Power gain
• Process gain
• Transmitter power output

 This article incorporates public domain material from Federal Standard 1037C. General Services Administration. Archived from the original on 2022-01-22.