Wikipedia

90 mm gun M1/M2/M3

For the French 90mm field gun of 1877 used in World War I, see De Bange 90 mm cannon.

The 90 mm gun M1/M2/M3 was an American heavy anti-aircraft and anti-tank gun, playing a role similar to the German 8.8cm Flak 18. It had a 3.5 in (90 mm) diameter bore, and a 50 caliber barrel, giving it a length of 15 ft (4.6 m). It was capable of firing a 3.5 in × 23.6 in (90 mm × 600 mm) shell 62,474 ft (19,042 m) horizontally, or a maximum altitude of 43,500 ft (13,300 m).

90 mm M1
A 90 mm M1 at CFB Borden
Type
Place of originUnited States
Service history
In service1938–1960[1]
Used by
Wars
Production history
Produced1940 -
No. built133,833 (M1,M2) (1940–1945)
6,648 (M1A1)
Variants
  • T2
  • M1
  • M1A1
  • M2
  • T7
  • M3
  • M3A1
  • T8
  • T15 later redesignated T54
  • T18–T21
Specifications
Mass
  • M1A1: 19,000 lb (8,600 kg)
  • M2: 32,300 lb (14,700 kg)
  • M3: 2,260 lb (1,030 kg) (gun only)
LengthM1A1: 29.6 ft (9.0 m)
Barrel length
  • M1: 200 in (5,100 mm) L/55 (55 caliber)
  • M3: 186 in (4,700 mm) L/53 (53 caliber)
WidthM1A1: 13.6 ft (4.1 m)
HeightM1A1: 10.1 ft (3.1 m)
Crew
  • M1: 8 (1× gunner 7× loader)
  • M2: 8 (1× gunner 7× loader)
Shell90 x 600-615mmR
  • M3 HE: 3.5 in × 37.44 in (90 mm × 950 mm) (M71 complete round)
  • M3 APC: 3.5 in × 38.24 in (90 mm × 970 mm) (M82 complete round)
  • M3 AP: 3.5 in × 32.75 in (90 mm × 830 mm) (M77 complete round)
Shell weight
  • M71 HE: 23.29 lb (10.56 kg) projectile, 41.93 lb (19.02 kg) complete
  • M82 APC: 24.11 lb (10.94 kg) projectile, 42.75 lb (19.39 kg) complete
  • M77 AP: 23.40 lb (10.61 kg) projectile, 42.04 lb (19.07 kg) complete
Caliber90 mm (3.5 in)
Elevation
  • M1: -10° to +90°
  • M2: -10° to +90°
  • M3: -10° to +23°
Traverse360°
Rate of fire
  • 6 rpm in the anti-tank variant
  • 10 rpm in the anti-aircraft variant
Muzzle velocity
  • M3 HE and AP: 2,700 ft/s (820 m/s)
  • M3 APC: 2,670 ft/s (810 m/s)
Maximum firing range
  • Maximum horizontal:
  • M1A1: 62,474 ft (19,042 m)
  • Maximum ceiling:
  • M1A1: 43,500 ft (13,300 m)

The 90 mm gun was the US Army's primary heavy anti-aircraft gun from just prior to the opening of World War II into 1946, complemented by small numbers of the much larger 120 mm M1 gun. Both were widely deployed in the United States postwar as the Cold War presented a perceived threat from Soviet bombers. The anti-aircraft guns were phased out in the middle 1950s as their role was taken over by surface-to-air missiles such as the MIM-3 Nike Ajax.[3]

As a tank gun it was the main weapon of the M36 tank destroyer and M26 Pershing tank, as well as a number of post-war tanks like the M56 Scorpion. It was also briefly deployed from 1943–1946 as a coast defense weapon with the United States Army Coast Artillery Corps. Each gun cost roughly $50,000 to make in 1940 and utilized up to 30 separate contractors to manufacture.[4]

History

edit

Prior to World War II, the primary US anti-aircraft guns were the 3-inch M1918 gun (76.2 mm L/40) and 3-inch anti-aircraft gun M3 (76.2 mm L/50), a widely used caliber for this class of weapon. Similar weapons were in British, Soviet and other arsenals. There had been several upgrades to the weapon over its history, including the experimental T8 and T9 versions developed in the early 1930s, that were intended to enter service later in that decade.

However, the US Army became interested in a much more capable weapon instead, and on 9 June 1938, it issued a development contract calling for two new guns, one of 90 mm, which it felt was the largest possible size that was still capable of being manually loaded at high elevations, and another, using assisted loading, of 120 mm (4.7 in). On 18 August 1938 the development of the Mounting T1 was approved as well. The new design seemed so much better than developments of the older three-inch that work on the three-inch T9 was canceled in 1938, just as it became production-ready. On 21 March 1940, the second development of the 90 mm design, the T2, was standardized as the 90 mm M1, while its larger cousin became the 120 mm M1 gun.

A few hundred M1s were completed when several improvements were added to produce the 90 mm M1A1, which entered production in late 1940, and was accepted as the standard on 22 May 1941. Since national arsenals had limited capacity, production of first 300 gun mounts was contracted to Allis-Chalmers in November 1940, with the first unit shipped in September 1941.[5] The M1A1 included an improved mount and spring-rammer on the breech, with the result that firing rates went up to 20 rounds per minute. Several thousand were available when the US entered the war, and the M1A1 was their standard anti-aircraft gun for the rest of the conflict. Production rates continued to improve, topping out in a few thousand per month.[when?]

Year 1941 1942 1943 1944 1945 Total
Production[6] 171 3286 4074 300 0 7831

Like the German 88 and the British QF 3.7 inch AA gun, the M1A1 was used against tanks in combat but, unlike the others, it could not be depressed to fire against them. On 11 September 1942, the Army issued specifications for a new mount to allow it to be used in this role, which resulted in the 90 mm M2, introducing yet another new mount, one that could be depressed to 10 degrees below the horizontal and featured a new electrically-assisted rammer. It became the standard weapon from 13 May 1943.

Anti-aircraft operation

edit
 
M7 gun director, 1944
 
View of a 90 mm anti-aircraft gun emplacement, Okinawa, 1945

In anti-aircraft use, the guns were normally operated in groups of four, controlled by the M7 or M9 gun director or Kerrison predictors. Radar direction was common, starting with the SCR-268 in 1941, which was not accurate enough to directly lay the guns, but provided accurate ranging throughout the engagement. For night-time use, a searchlight was slaved to the radar with a beam width set so that the target would be somewhere in the beam when it was turned on, at which point the engagement continued as in the day. In 1944, the system was upgraded with the addition of the SCR-584 microwave radar, which was accurate to about 0.06 degrees (1 mil) and also provided automatic tracking. With the SCR-584, direction and range information was sent directly to the Bell Labs M3 gun data computer, and M9 director, which could direct and lay the guns automatically, all the crews had to do was load the guns.

Main anti-tank developments

edit

The M3 was also adapted as the main gun for various armored vehicles, starting with the experimental T7 which was accepted as the 90 mm M3. The test firing of the M3 took place on an M10 tank destroyer in early 1943. The M3 gun was used on the M36 tank destroyer, and the T26 (later, M26) Pershing tank.[7] The M3 fired an M82 APC shot with a muzzle velocity of 2,650 ft/s (810 m/s).[7] However, both the muzzle velocity of the standard M3 gun and the quality of the steel used in the M82 APC (armor-piercing capped) shot, while comparable to the 8.8 cm KwK 36 L/56 mounted on the Tiger I, were inferior to the Tiger II's KwK 43 L/71 8.8 cm main gun firing its standard APCBC (armor-piercing capped ballistic cap) shot used by German forces, with the result that the former's penetration fell far short of the standard projectile fired by that German tank.[7] As a result, US ordnance provided some T26/M26 tank crews with the 90 mm HVAP (high-velocity, armor-piercing) tungsten penetrator sub-caliber projectile with a muzzle velocity of 3,350 ft/s (1,020 m/s), or the T33 AP with a re-heat-treated projectile with ballistic windshield and a muzzle velocity of 2,800 ft/s (850 m/s).[7][8] The HVAP could compete with the KwK 43's penetration performance when firing standard APCBC, but tungsten ammunition was always in short supply.

Performance

edit
Calculated penetration at range (90 degrees) using 50% success criteria.[9]
Ammunition type Muzzle velocity
(m/s)		 Penetration (mm)
100 m 250 m 500 m 750 m 1,000 m 1,250 m 1,500 m 1,750 m 2,000 m 2,500 m 3,000 m
M77 AP versus FHA 823 m/s (2,700 ft/s) 168 159 146 134 122 112 102 94 86 72 60
M77 AP versus RHA 823 m/s (2,700 ft/s) 188 179 163 150 137 125 115 105 96 81 68
M82 APC versus FHA 808 m/s (2,650 ft/s) 151 150 147 144 140 135 131 127 123 115 107
M82 APC versus RHA 808 m/s (2,650 ft/s) 164 156 150 143 137 131 125 119 114 104 92
Late M82 APC versus RHA 853 m/s (2,800 ft/s) 169 168 164 157 151 144 140 136 132 123 116
Late M82 APC versus FHA 853 m/s (2,800 ft/s) 161 159 155 151 147 144 138 133 127 115 104
T33 AP versus RHA 853 m/s (2,800 ft/s) 206 201 193 185 178 170 164 157 150 139 128
T30E16 HVAP 1,018 m/s (3,340 ft/s) 306 295 278 262 246 232 218 205 193 171 151

An unsuccessful anti-tank variant was the T8 gun on the T5 carriage. The gun was an M1 with the recoil mechanism from the M2A1 105 mm howitzer. Eventually a version of the T8 with the T20E1 gun and T15 carriage was tested; this led to the 105 mm anti-tank gun T8.[10]

Because the standard fifteen-and-a-half foot long M3 90 mm main tank gun proved incapable of penetrating the heaviest frontal armor of the heaviest German tanks such as the Tiger II tank and the rarer Jagdtiger tank destroyer variant, a number of improved versions of the M3 were developed, including the T14 which included a standard muzzle brake and the T15 series.[7] The 90 mm T15E1 L/73, with its 21 ft (6.4 m) long barrel, was designed and developed as an AT gun that could match or surpass the performance of the 8.8 cm KwK43 L/71 cannon, the famous long 88 on the Tiger II.

High-velocity 90 mm gun T15 performance

edit

The T15 90 mm L/73 anti-tank gun utilized many types of armor piercing ammunition.

  • T43 APBC: A solid shot, it was a modified T33 for use by the T15. It had a muzzle velocity of 3,200 ft/s (980 m/s) and therefore increased penetration capabilities. It could punch through 4 in (100 mm) of armor angled at 60°(from vertical) up to about 1,300 ft (400 m).
  • T41 APCBC: Modified M82 projectile of the M3 cannon, fired at a much higher velocity of 3,200 ft/s, than the normal 2,670 ft/s. It could defeat up to 8.5 in (220 mm) of vertical armor at 30 ft (9.1 m).
  • T44 HVAP: Modified M304(T30E16) for use out of the T15. Muzzle velocity of 3,750 ft/s (1,140 m/s). Maximum penetration of 15 in (380 mm) of vertical armor at 30 ft.
  • T50 APCBC: An M82 projectile with increased nose hardness and overall better design. Same muzzle velocity 3,200 ft/s, but increased penetration, equal to the KwK43. 9.1–9.3 in (231–236 mm) against vertical armor at point-blank range.[11][12]
Ammunition type Muzzle velocity (m/s) H.E. filler Penetration (mm)

PB (10yards)

0°

1,000 yards

0°

2,000 yards

T43 APBC 975 Solid shot
T41 APCBC(M82) 975 140g explosive D. 216 mm 190 mm 175 mm
T50 APCBC 975 140 g explosive D. 235 mm ~205 mm ~180 mm
T44 HVAP 1,143 Solid shot 373 mm 302 mm 241 mm
 
An experimental 90 mm anti-tank gun

Two versions of the T15 were made: the T15E1 with single-piece ammunition and the T15E2 with two-piece ammunition.

By mid-March 1945, a T26E1 pilot was equipped with the 90 mm T15E1 and was sent to Europe in a ''trial by combat''. It was given to the 3rd Armor Division where it was enhanced with additional armor plates. Its gun was fired in anger on only one occasion, on 4 April 1945, where it engaged and destroyed a German armored vehicle, probably a Tiger I or Panther, at a range of 4,500 ft (1,400 m) during the fighting along the Weser River.[13] According to the memoirs of John P. Irwin, it knocked out a King Tiger in Dessau as well as a Panzer IV and a Panther. However, the Tiger II claim is disputed by historians on the grounds that the nearest unit known to be equipped with Tiger IIs was 70 miles from Dessau on the date when the kill was claimed.

Near the end of World War II, more experimental versions of the 90 mm gun were tested including the higher-velocity T18 and T19 main guns. The T19 was a T18 modified in an attempt to reduce barrel wear. Other versions included the T21, which was intended for wheeled vehicles, and the T22, which used the breech from the standard 105 mm M2 howitzer. The T21 and T22 were designed to use larger powder charges. None of these versions entered service.

In the post-World War II era, development of the T15 continued redesignated as the T54, which used a slightly shorter and fatter propellent casing than that of the T15E1.[14] The T54 served as the main gun on the M26E1 Pershing.[14]

Further developments

edit

In 1948 an improved version of the M3A1, designated as the T119, was designed to be used on the T42 (and later M47 Patton) and had a higher muzzle velocity using new ammunition loaded to produce higher chamber pressures. The new ammunition had a slightly longer shoulder to prevent accidental chambering in the older M3 variants. The T119 was backwards compatible with the ammunition used on the M3A1. Upon standardization of the M47 in 1951, the T119E1 version was redesignated as the 90 mm gun M36.[15]

The lightweight variant of the T119, designated as the T139 and standardized as the 90 mm gun M41, equipped the M48 Patton tanks used in the Vietnam War.[15] The M41 with a modified recoil system was mounted as the 90 mm gun M54 on the M56 Scorpion anti-tank vehicle. This gun was found to be inadequate and incapable of penetrating modern armor, requiring a stop gap of HEAT-FS shells to be utilized until the 105mm L7 derivative could become more prevalent.

Coast artillery

edit
 
90 mm M1 gun on T3/M3 seacoast mount at Battery Parrott, Fort Monroe, Virginia

During World War II the Coast Artillery Corps adopted the 90 mm M1 to supplement or replace aging three-inch guns in harbor defense commands in CONUS and US territories. The guns were organized in anti-motor torpedo boat (AMTB) batteries, typically with four 90 mm guns and two 37 mm or 40 mm AA guns each. Typically two of the 90 mm guns were on T3/M3 fixed mounts and two were on towed M1A1 or M2 mounts, with the 37 mm or 40 mm weapons on single towed mounts. The T3/M3 mount was designed for anti-surface or anti-aircraft fire. Emplacements for at least 90 batteries of two fixed guns each, plus mobile weapons, were constructed in CONUS, Panama, Alaska, Hawaii, Puerto Rico, and elsewhere in 1943.[16]

Variants

edit
 
90 mm guns M2, Korea

M1

edit
  • Towed anti-aircraft gun. Approved for service in 1940.
  • Fixed on T3/M3 mount for coastal artillery service

M1A1

edit

Towed anti-aircraft gun. Production began in 1940. It featured the M8A1 spring rammer. Its rate of fire was 20 rounds per minute.

 
M2 in the United States Army Ordnance Museum

M2

edit

A complete redesign to make the gun dual role, functioning as an anti-tank gun as well as an anti-aircraft gun. The ammunition feed was upgraded and an automatic fuze setter-rammer, the M20, was added. This enabled the rate of fire to reach up to 24 rounds per minute. Elevation was improved with the gun able to depress to −10 degrees. To protect the crew, a large metal shield was added. The M2 was the standard weapon by 13 May 1943. From the march it could fire from its wheels in three minutes, and from a fully emplaced position in seven minutes. In 1944 the weapon was enhanced with the addition of proximity fused shells.

M3

edit

A tank-mounted anti-tank version of the gun. It was used to equip the M36 tank destroyer and the M26 Pershing tank. It is also known as the 90 mm L/53.

 
An M36 tank destroyer with the 90 mm gun

M3A1

edit

M3 gun with single baffle muzzle brake and bore evacuator, used on M46 Patton and early versions of the M48 Patton tanks and refurbished M36 tank destroyers during the Korean War.

M3 ammunition

edit
  • M71 HE – 23.29 lb (10.56 kg) (projectile)
  • M77 AP – 23.40 lb (10.61 kg) (projectile)
  • M82 APC – 24.11 lb (10.94 kg) (projectile)[17]

Surviving examples

edit

See also

edit

Weapons of comparable role, performance and era

edit

References

edit
  1. ^ CANON ANTIAÉRIEN M1A1 DE 90MM
  2. ^ FTA- Le canon US de 90mm antiaérien
  3. ^ "US Army AAA Gun Site Program 1951-59 at ed-thelen.org". Archived from the original on 16 September 2020. Retrieved 10 July 2020.
  4. ^ The Ordnance Department: Procurement and Supply
  5. ^ "Hearings, March 5-13, 1947 and appendix". 1947.
  6. ^ "The United States Army in World War II: Statistics". 1953.
  7. ^ a b c d e Green, Michael, Tiger Tanks At War, Zenith Press, ISBN 9780760331125, 076033112X (2008), pp. 118-122
  8. ^ Armor-Piercing Ammunition for Gun, 90-mm, M3, Washington, D.C., U.S. Army: Office of the Chief of Ordnance (January 1945)
  9. ^ Bird, Lorrin Rexford; Livingston, Robert D. (2001). WWII Ballistics: Armor and Gunnery. Overmatch Press. p. 63.
  10. ^ Hogg, Ian V. (2002). British and American Artillery of World War II. Mechanicsburg, PA: Stackpole Books. pp. 90–92. ISBN 1-85367-478-8.
  11. ^ Report ADA954868 Comparative Effectiveness of Armor Defeating Ammunition.
  12. ^ Report AD301343 An Analytical Study of Data on Armor Penetration by Tank-Fired Kinetic Energy Projectiles.
  13. ^ Zaloga, Steven. M26/M46 Pershing Tank 1943–53.
  14. ^ a b Hunnicutt, R.P. Pershing: A History Of The Medium Tank T20 Series, Presidio Press, ISBN 0891416935, 9780891416937 (1999)
  15. ^ a b Hunnicutt, R. P. (1984). Patton (1st ed.). Novato, Calif.: Presidio Press. ISBN 0-89141-230-1. OCLC 11043006.
  16. ^ Berhow, Mark A., ed. (2004). American Seacoast Defenses, A Reference Guide (Second ed.). CDSG Press. pp. 80–81, 200–223, 233, 249–251. ISBN 0-9748167-0-1.
  17. ^ "United States War Department TM 9-374 Technical Manual 90-MM Gun M3 Mounted in Combat Vehicles" (PDF). 11 September 1944. pp. 90–91. Retrieved 6 November 2014.
  • TM 9-2300 standard artillery and fire control material. dated 1944
  • TM 9-370
  • TM 9-1370
  • SNL D-28
edit
 
Wikimedia Commons has media related to 90 mm gun M1/M2.
Retrieved from "https://en.wikipedia.org/w/index.php?title=90_mm_gun_M1/M2/M3&oldid=1254018708"