The ClubSwan 42, also called the Club Swan 42 and the New York Yacht Club 42 (NYYC 42), is a Finnish sailboat that was designed by Germán Frers as a one design racer-cruiser and first built in 2005.[1][2][3][4][5][6][7][excessive citations]

ClubSwan 42
Development
DesignerGermán Frers
LocationFinland
Year2005
No. built58
Builder(s)Oy Nautor AB
RoleRacer-Cruiser
NameClubSwan 42
Boat
Displacement16,500 lb (7,484 kg)
Draft8.86 ft (2.70 m)
Hull
Typemonohull
Constructionglassfibre
LOA42.58 ft (12.98 m)
LWL37.04 ft (11.29 m)
Beam12.89 ft (3.93 m)
Engine typeVolvo Penta 40 hp (30 kW) diesel engine
Hull appendages
Keel/board typeFin keel with weighted bulb
Ballast7,046 lb (3,196 kg)
Rudder(s)Spade-type rudder
Rig
Rig typeBermuda rig
I foretriangle height59.06 ft (18.00 m)
J foretriangle base16.34 ft (4.98 m)
P mainsail luff56.56 ft (17.24 m)
E mainsail foot18.95 ft (5.78 m)
Mast length62.89 ft (19.17 m)
Sails
SailplanFractional rigged sloop
Mainsail area661 sq ft (61.4 m2)
Jib/genoa area515 sq ft (47.8 m2)
Gennaker area1,991 sq ft (185.0 m2)
Upwind sail area1,175 sq ft (109.2 m2)
Downwind sail area2,652 sq ft (246.4 m2)

Production

edit

The design was a joint project between the New York Yacht Club (NYYC) and Finnish company Oy Nautor AB who built the boats in Estonia. Production ran from 2005 until 2013 with 58 boats completed. Boats built for members of the NYYC were delivered as the NYYC 42 and boats sold to others were marketed as the ClubSwan 42. Of an initial order of 36 boats, 25 went to NYYC members.[1][2][8][9]

Design

edit

The class was conceived by David Elwell, of the NYYC as a boat for club cruises, regattas and offshore racing, including the Newport Bermuda Race and International Rating Certificate competition. The class concept was promulgated as a competition with Oy Nautor AB winning.[10][11]

The ClubSwan 42 is a racing keelboat, built predominantly of glassfibre, with wood trim. It has a 9/10 fractional sloop rig, with a keel-stepped mast, two sets of swept spreaders and a Hall Spars carbon fibre mast with an aluminium boom. The hull has a slightly raked stem, a reverse transom, an internally mounted spade-type rudder controlled by dual wheels and a fixed fin keel with a weighted bulb. It displaces 15,983 lb (7,250 kg) and carries 7,046 lb (3,196 kg) of lead ballast.[1][2][3][10]

The boat has a draft of 8.86 ft (2.70 m) with the standard keel.[1][2][3]

The boat is fitted with a Swedish Volvo Penta diesel engine of 40 hp (30 kW) for docking and manoeuvring. The fuel tank holds 39 U.S. gallons (150 L; 32 imp gal) and the fresh water tank has a capacity of 84 U.S. gallons (320 L; 70 imp gal).[1][2][3]

The design has sleeping accommodation for six people, with a double "V"-berth in the bow cabin, two straight settees in the main cabin and two aft cabins each with two berths. The galley is located on the port side just forward of the companionway ladder. The galley is L-shaped and is equipped with a two-burner stove, an ice box and a sink. A navigation station is opposite the galley, on the starboard side. The head is located just aft of the bow cabin on the port side.[1][3][10]

For sailing downwind the design may be equipped with an asymmetrical spinnaker of 1,991 sq ft (185.0 m2), flown from a retractable bowsprit.[1][2][3]

The design has a hull speed of 8.16 kn (15.11 km/h).[1]

Operational history

edit

The boat is supported by an active class club that organizes racing events, the Swan 42 Class.[7]

In a 2007 Sailing World review, Barrett Holby wrote, "in light air the boat showed a good turn of speed. It sailed upwind very easily and excelled downwind. The 26.63 sail-area-to-displacement ratio explains why it does so well in light air, and although we sailed it in a 6-knot breeze, it required maximum crew weight on the rail [the one-design class maximum crew weight is 1,870 pounds]."[10]

In a 2007 review for Sailing Magazine, John Kretschmer wrote, "the CS 42 has been described by her maker as a club racer-cruiser with adequate amenities for weekend adventures and sleeping aboard, make no mistake, she's a thoroughbred meant for dashing through the waves, not hanging on the hook. To paraphrase the great writer Gertrude Stein, rose is a rose is a rose, by any other name, and this one is a race boat."[11]

See also

edit

References

edit
  1. ^ a b c d e f g h McArthur, Bruce (2023). "Club Swan 42". sailboatdata.com. Archived from the original on 14 May 2023. Retrieved 14 May 2023.
  2. ^ a b c d e f Ulladulla. "New york yacht club 42 frers". Sailboat Lab. Archived from the original on 14 May 2023. Retrieved 14 May 2023.
  3. ^ a b c d e f "Club Swan 42 Sailboat specifications". Boat-Specs.com. 2023. Archived from the original on 14 May 2023. Retrieved 14 May 2023.
  4. ^ "NYYC 42 Sailboat specifications". Boat-Specs.com. 2023. Archived from the original on 14 May 2023. Retrieved 14 May 2023.
  5. ^ McArthur, Bruce (2023). "German Frers". sailboatdata.com. Archived from the original on 13 May 2023. Retrieved 14 May 2023.
  6. ^ "Frers Naval Architecture & Engineering". Boat-Specs.com. 2023. Archived from the original on 13 May 2023. Retrieved 14 May 2023.
  7. ^ a b Oy Nautor AB. "ClubSwan 42 - The ClubSwan Division". nautorswan.com. Archived from the original on 14 May 2023. Retrieved 14 May 2023.
  8. ^ McArthur, Bruce (2023). "Nautor (Swan sailboats)". sailboatdata.com. Archived from the original on 7 April 2022. Retrieved 14 May 2023.
  9. ^ "Nautor's Swan Sailboat builder". Boat-Specs.com. 2023. Archived from the original on 6 April 2023. Retrieved 14 May 2023.
  10. ^ a b c d Holby, Barrett (13 December 2007). "Club Swan 42: Review". Sailing World. Archived from the original on 14 May 2023. Retrieved 14 May 2023.
  11. ^ a b Kretschmer, John (January 2007). "Club Swan 42". Sailing Magazine. Archived from the original on 14 May 2023. Retrieved 14 May 2023.
edit