Jump to content

James Lick telescope

Coordinates: 37°20′28″N 121°38′35″W / 37.34111°N 121.64306°W / 37.34111; -121.64306
From Wikipedia, the free encyclopedia

James Lick telescope
The James Lick telescope
Named afterJames Lick Edit this on Wikidata
Part ofLick Observatory Edit this on Wikidata
Location(s)Lick Observatory Main Building, Santa Clara County, California, Pacific States Region
Coordinates37°20′28″N 121°38′35″W / 37.34111°N 121.64306°W / 37.34111; -121.64306
OrganizationUniversity of California Edit this on Wikidata
Altitude4,200 ft (1,300 m) Edit this at Wikidata
First light3 January 1888 Edit this on Wikidata
Telescope styleoptical telescope
refracting telescope Edit this on Wikidata
Diameter36 in (0.91 m) Edit this at Wikidata
Length57 ft (17 m) Edit this at Wikidata
Mass25,000 lb (11,000 kg) Edit this at Wikidata
Focal length17.37 m (57 ft 0 in) Edit this at Wikidata
Mountingequatorial mount Edit this on Wikidata
Enclosuredome Edit this on Wikidata
Websitewww.ucolick.org/main/science/telescopes/refractor.html Edit this at Wikidata
James Lick telescope is located in the United States
James Lick telescope
Location of James Lick telescope
  Related media on Commons
The James Lick Telescope, shown here in an 1889 drawing

The James Lick Telescope is a refracting telescope built in 1888. It has a lens, which is 91 centimetres (36 in) in diameter—a major achievement in its day. The instrument remains in operation and public viewing is allowed on a limited basis. Also called the "Great Lick Refractor" or simply "Lick Refractor", it was the largest refracting telescope in the world until 1897, and now ranks third,[not verified in body] after the 40-inch refractor at the Yerkes Observatory and the Swedish 1-m Solar Telescope. (The many larger telescopes in use today are reflecting telescopes, with a mirror rather than lens as the major optical component.) The telescope is located at the University of California's Lick Observatory atop Mount Hamilton at an elevation of 1,283 metres (4,209 ft) above sea level. The instrument is housed inside a dome that is powered by hydraulic systems that raise and lower the floor, rotate the dome and drive the clock mechanism to track the Earth's rotation. The original hydraulic arrangement still operates today, with the exception that the original wind-powered pumps that once filled the reservoirs have been replaced with electric pumps. James Lick is entombed below the floor of the observing room of the telescope.

Here are some excerpts from an 1894 book describing the telescope:[1]

The height of the marble floor of the main building above mean sea level is 4209 feet. On a closely connected peak half a mile to the east of the Observatory, and 50 feet higher, are the reservoirs from which water for household and photographic purposes is distributed. A spring about 350 feet below and one mile to the northeast of the Observatory supplies excellent water. Another peak seven-eighths of a mile to the east is the summit of Mount Hamilton; it is 180 feet higher than the Observatory, and supports the reservoirs supplying power for moving the dome, raising the movable floor, and winding the driving clock of the great telescope. This system receives its supply from the winter rains falling on the roofs; the water being pumped to the reservoirs on the higher peak by means of windmills.

The movable floor in the dome is the first of the kind to be constructed. It is 18 metres (60 ft) in diameter, and can be raised or lowered through a distance of 16+12 feet (5.0 m), its purpose being to bring the observer within convenient reach of the eye end of the telescope.

Construction

[edit]
A drawing of the telescope from an astronomy book

The fabrication of the two-element achromatic objective lens, the largest lens ever made at the time, caused years of delay.[2] The famous large telescope maker Alvan Clark, was in charge of the optical design. He gave the contract for casting the high quality optical glass blanks, of a size never before attempted, to the firm of Charles Feil in Paris. One of the huge glass disks broke during shipping, and replacing it was delayed. Finally, after 18 failed attempts, the lens was finished, transported safely across country, and on December 31, 1887, was carefully installed in the telescope tube. The builders had to wait for three days for a break in the clouds to test it. On the evening of January 3, the telescope saw first light,[2] and users found that the instrument could not be focused—an error in the estimation of the lens' focal length had caused the tube to be built too long. A hacksaw was procured, the great tube was unceremoniously cut back to the proper length and the star Aldebaran came into focus.

Contemporaries on debut

[edit]
Legend


Name/Observatory Aperture
cm (in)
Type Location then (Original Site) Extant*
Yerkes Observatory[3] 102 cm (40″) achromat Williams Bay, Wisconsin, USA 1897
National Observatory, Paris 122 cm (48″) reflector Paris, France 1875–1943[4]
James Lick telescope, Lick Observatory 91 cm (36″) achromat Mount Hamilton, California, USA 1888
Crossley Reflector[5] 91.4 cm (36″) reflector – glass Lick Observatory, USA 1896

See also

[edit]

References

[edit]
  1. ^ A Brief Account of the Lick Observatory of the University of California. The University Press, 1894.
  2. ^ a b Misch, Tony; Remington Stone (1998). "The Building of Lick Observatory". Lick Observatory, Univ. of California. Retrieved June 30, 2008.
  3. ^ "The 40-inch". Archived from the original on February 25, 2009. Retrieved October 2, 2019.
  4. ^ "1914Obs....37..245H Page 250". Retrieved September 8, 2019.
  5. ^ "Mt. Hamilton Telescopes: CrossleyTelescope". ucolick.org. Retrieved September 8, 2019.
[edit]