ഫലകം:Infobox spring

ഫലകത്തിന്റെ വിവരണം

This template can be used to create an infobox for a spring, including geysers or hot springs.

Usage

Daisy Geyser
Daisy Geyser during an eruption
Name origin	Hague Geological Surveys, 1880s
Location	Upper Geyser Basin, Yellowstone National Park, Teton County, Wyoming
Coordinates	44°28′12″N 110°50′42″W
Elevation	7,329 അടി (2,234 മീ)
Temperature	84.5 °C (184.1 °F)
Map of Upper Geyser Basin

Most commonly used parameters		All parameters
{{Infobox spring | name = | photo = | photo_width = | photo_caption = | map = | map_width = | map_caption = | name_origin = | location = | elevation = | lat_d = | long_d = | coords = | coords_ref = | hot_spring_type = | height = | duration = | frequency = | discharge = | temperature = | depth = }}		{{Infobox spring | name = | other_name = | photo = | photo_width = | photo_alt = | photo_caption = | map = | relief = | map_width = | map_alt = | map_caption = | mark = | mark_width = | label = | label_position = | name_origin = | location = | spring_source = | elevation = | lat_d = | lat_m = | lat_s = | lat_NS = | long_d = | long_m = | long_s = | long_EW = | region = | scale = | source = | format = | display = | coords = | coords_ref = | hot_spring_type = | type = | provides = | magnitude = | height = | duration = | frequency = | discharge = | temperature = | depth = | child = | embedded = }}

Parameter descriptions

Parameter	Description
name	Required. Official name of the geothermal feature (e.g Old Faithful Geyser)
other_name	If the feature is also commonly known by another name then use this parameter for the alternate name.
photo	The name of an image file to be displayed. No special formatting is needed. For geysers, a photo of the eruption is preferred.
photo_width	The width in pixels of the image. The default and maximum width is 284px. An image with vertical orientation (portrait mode) may need to be adjusted. Use map_width=200 and not map_width=200px.
photo_alt	Alternate text for the photo for visually impaired readers. See WP:ALT.
photo_caption	The caption that will display bellow the image. Include month and year of picture, if known.
map	The name of the map to be displayed. See Map display methods.
map_relief	When the geographical coordinates method is used (see Map display methods), any non-blank value (map_relief=yes, map_relief=1, etc.) will cause the template to display a relief map image, where available. For additional information, see Template:Location map#Relief parameter.
map_width	Width to display the map image in pixels. The default and maximum is 220. For example map_width=200 (not map_width=200px).
map_alt	Alternative text for the map image, see WP:ALT.
map_caption	Text displayed below the map image, if required.
mark	The image to use for the marker. The default is Red pog.svg. See Template:Infobox map#Marks for more information.
marker_width	The display width of the marker image in pixels. Default = 8.
label	Text that will be displayed next to the marker. Works with label_position below.
label_position	Specifies the position of a label with respect to the marker. Valid values are left, right, top, bottom and none. See label above.
Coordinate related parameters
lat_d	The degrees of latitude. This value can be specified as a decimal degree and when this format is used minutes and seconds should not be specified. See this page.
lat_m	The minutes of latitude.
lat_s	The seconds of latitude.
lat_NS	N if north of the equator, S if south of the equator. Other values will be disregarded.
long_d	The degrees of longitude. This value can be specified as a decimal degree and when this format is used minutes and seconds should not be specified. See this page.
long_m	The minutes of longitude.
long_s	The seconds of longitude.
long_EW	E if East of the prime meridian, W if west of the prime meridian. Other values will be disregarded.
scale	Determines the zoom factor for external map websites. See scale. The default value for this template is 1:50,000. Using scale=100000 will change the zoom to 1:100,000.
region	A country code. See ISO 3166-2:US, ISO 3166-2 and ISO 3166-1 alpha-2. For example US-OR is the code for Oregon. This computer readable code is recommended. It will not be displayed. See region.
source	Source of the coordinate data. See source. For example gnis or ngs, etc. It will not be displayed. Not all possible values are recognized.
format	Determines the format of the coordinates displayed. Valid values are dms for degrees, minutes and seconds, and dec for decimal degrees. The default value is dms.
display	Determines where the coordinates will be displayed. Valid values are inline and inline,title and their variants. The default is inline,title and is recommended.
coords	Can be used with {{coord}} template to display geographical coordinates.
coords_ref	Used with <ref>...</ref> tags to cite a references.
Other parameters
name_origin	Where did the name of this feature originate? Who named this feature?
location	Location of the feature. The specific location of the geyser first, followed by the general region. For well known geyser regions, use the local group or basin (e.g, Lower Geyser Basin, Yellowstone National Park).
spring_source	Source for the water for the spring.
elevation	The elevation of the feature (don't forget to include both feet and meters).
hot_spring_type	The type of geothermal features. Possible options are geyser, fumarole, mud pot or hot spring. Geysers can be cone or fountain geysers. For non-geothermal springs, use type
type	The type of spring. Possible options are. For geothermal springs, use hot_spring_type
provides	Body of water into which the spring discharges.
height	For geysers, the minimum to maximum height of an eruption (e.g - 15 - 20 minutes)
duration	For geysers, the minimum to maximum duration of an eruption
frequency	For geysers, the average frequency of an eruption
discharge	Water discharge for a geyser or a flowing spring
magnitude	The magnitude of the discharge as measured by the spring classification scale
temperature	For pools, the average temperature of the water in degrees Fahrenheit and Celsius
depth	For pools, the average depth of the feature
child	Used to embed this template in another. See below.
embedded	Used to embed another template in this one. See below.

Map display methods

This template uses Template:Infobox map. For more details, see the documentation for that template.

Simple map image method

Any map image can be displayed by specifying the name of the image file. Notice that when a photo and a map are specified the map will appear at the bottom of the infobox and that if no photo is specified the map will be displayed at the top.

Big Cone
Big Cone Geyser
Location	West Thumb Geyser Basin, Yellowstone National Park, Teton County, Wyoming
Coordinates	44°25′03″N 110°34′14″W
Elevation	7,864 അടി (2,396.9 മീ)
West Thumb Geyser Basin

{{Infobox spring
| name = Big Cone
| photo = Big cone.jpg
| photo_width = 
| photo_caption = Big Cone Geyser
| map_image = WestThumbGeyserBasin-Big Cone.jpg
| map_caption = West Thumb Geyser Basin
| map_alt = Map shows Big Cone is in the West Thumb Geyser Basin.
| map_width = 
| location = West Thumb Geyser Basin, Yellowstone National Park, [[Teton County, Wyoming]]
| coords = {{coord|44|25|03|N|110|34|14|W|type:landmark_region:US-WY}}
| coords_ref = 
| elevation = {{convert|7864|ft|m|1}}
}}

Geographical coordinate method

A mark can be superimposed on one of a set of special map templates. If a valid map name is specified this is the method the template will attempt to use. To display a mark the geographic coordinates must be specified using the parameters lat_d, long_d, etc. The mark will not be displayed if the {{Coord}} template is used. See the documentation for {{Location map}}. The parameters for this template map to a subset of the parameters for Location map. A map template can be found using these sources:

List of templates - Many of the items listed here are redirects and a few templates may not function as expected.

Category:Location map templates - templates sorted by category.

Special:WhatLinksHere/Template:Location map/Info - a search that might help.

Special:Prefixindex/Template:Location map - another search that might help.

All of the names begin with the words "Location map" followed by the area covered. The value you need to specify is the area name. The map template for the for Alberta, Canada is Location map Canada Alberta. In this case specify map=Canada Alberta or, in this case, map=Alberta. The following example does not produce output that is optimum for use with the geysers of Yellowstone but demonstrates the method.

Big Alcove Spring
Big Alcove Spring Location of Big Alcove Spring in Wyoming
Coordinates	44°43′08″N 110°42′24″W

{{Infobox spring
| name = Big Alcove Spring
| map = Wyoming2
| map_alt = Big Alcove Spring is located in the northwestern Wyoming
| map_caption = Location of Big Alcove Spring in Wyoming
| map_width = 200
| label = Big Alcove Spring
| lat_d = 44.7188889
| long_d = -110.7069444
| region = US-WY
}}

The label is optional. By default it is usually displayed to the left of the mark.

X,Y coordinate method

The values for the x and y parameters are the pixel coordinates of the location mark when the image is scaled to a width of 1000 pixels.

x is the pixel offset for the mark from the left edge of an image 1000px wide.

y is the pixel offset for the mark from the top edge of an image 1000px wide.

There are at least two ways of obtaining these values:

1. Download the image from the image's file page to your computer. Open the image in a graphics editor, such as GIMP or XnView. Scale (resize) the image to a width of 1000px and then note the x, y coordinates when the mouse cursor points to the desired location. Use these values directly.
2. Download the image from the image's file page to your computer. Open the image in any image viewer that displays the coordinates of the cursor position, such as Paint from Microsoft. Note the X, Y coordinates when the mouse cursor points to the location. Then:

1000 · x'/w = x  and  1000 · y'/w = y

where x' and y' are the mouse cursor coordinates, w is the width of the image displayed on your computer and x and y are the values to assign to the x and y parameters.

These computed coordinates are relative and will work even if the width of the image displayed in an article is changed by another user. Using simple pixel coordinate values would not have this advantage. Note that Wikipedia does not allow the aspect ratio of an image to be altered.

Old Faithful

{{Infobox spring
| name = Old Faithful
| map_image = Old Faithful area.png
| map_alt = Road map of area
| map_caption =
| map_width = 200
| x = 680
| y = 630
}}

Template embedding

This template can be embedding in another infobox template by adding the code |child=yes. To embed another template in this one use |embedded={{Infobox ....

Microformats

The articles created using this template include an hCard microformat. For more information read this.